Super 30
Super 30 is a solvent-based, 30% solids acrylic sealer for exterior concrete and cement-based overlays. This sealer is ideal for initial sealing of broomed and decorative concrete surfaces.
TDS | click here
SDS | click here
$291.50
Super 30 is a single-component, 30% acrylic solids, 600 g/L, color-enhancing, high gloss sealer developed for SureCrete overlays or any cement-based product. It is vapor permeable, yet reduces the penetration of fluids into the surface. Super 30 will enhance the beauty, improve stain and abrasion resistance, and provide UV protection for driveways, garage floors, patios, walkways, pool decks, stucco, and concrete blocks.
Super 30 Application
Rolling
- Utilize a bucket grid to apply in a thin film.
- Roller covers require a solvent resistant core.
- The correct nap size varies due to texture. For example ¾” is recommended for heavy textured patterns, while ¼” mohair is
recommended for very smooth surfaces. - Do not allow puddling.
- Exercise care to eliminate roller tracks through back rolling.
Airless Spraying
- Airless sprayer should be capable of a minimum .5 gpm discharge.
- Tip size should be approximately .015” – .019” with 65° fan.
- For horizontal surface utilize an 8” – 10” extension.
- 4. Maintain a wet edge between passes.
Pump-up Sprayer
- Select solvent resistant sprayer.
- Select fan or cone tip as preferred that can pass 20% solids product.
- Have sufficient tips on hand to allow clean-up that will not interrupt application.
- If necessary, backroll sprayed area to lay product flat. When first coat is able to be walked on, a second coat may be applied. Best protection is achieved through the application of two thin coats.
Second Coat
Applies identically to the first coat. Allow 24 hours of cure time before foot traffic. Allow 72 hours of cure time before vehicular traffic
